What's new
Medium Format Forum

Register a free account now!

If you are registered, you get access to the members only section, can participate in the buy & sell second hand forum and last but not least you can reserve your preferred username before someone else takes it.

X2D and Magnetic Filters

F

fatphoca

New Member
I have been scratching my head as to which magnetic filter system to use for my 20-35mm E, 55V and soon to be released 35-100mm E lenses. They range from 72mm to 77mm to 86mm (I think) and that means in order to just use one set of filters I need to jump to 95mm to cover them all. Not many manufacturers make 72-95mm magnetic step ups and like one of the replies above I wish to have a UV filter on permanently for protection (i.e. not a magnetic UV filter that can come off).

So that means fitting a screw in UV filter to each lens first, then step ups with magnetic capabilities so that any other filters I add will stick magnetically.

Nisi doesn't make a 72-95mm magnetic step up.
Polarpro Base plates should fit each lens but the 86mm base plate is coarse thread and I have no idea if the new 35-100mm lens has a coarse or standard thread.
Maven makes some really useful step up rings with built in UV filters which would be perfect except they also don't make a 72-95mm version of these.
Kase doesn't make a 72-95mm magnetic step up either!

I'm at my wits end to make this work with one set of filters or may be I shouldn't and get a 82mm set for the 20-35mm and 55V and something else for the new lens?

Help!
 
Honestly, I’m not a fan of step-up rings, as they make it impossible to use lens hoods. Especially when working with multiple filters (which means more glass surfaces), I’ve found lens hoods to be very helpful. Luckily, both of my lenses have the same thread diameter, so I can get by with a single KASE filter set :)
 
Ristretto said:
Honestly, I’m not a fan of step-up rings, as they make it impossible to use lens hoods. Especially when working with multiple filters (which means more glass surfaces), I’ve found lens hoods to be very helpful. Luckily, both of my lenses have the same thread diameter, so I can get by with a single KASE filter set :)
Click to expand...
I don't think I have ever used a proper lens hood so it didn't even cross my mind! But I do see your point. I wish my lenses were all the same size as well.
 
I sometimes use Kase magnetic filters. Great quality with very little,if any, chromatic or other distortion. You can get a magnetic cap as well since the Hasselblad lens cap isn’t a great fit…and you wouldn’t want to lose it!
 
fatphoca said:
I have been scratching my head as to which magnetic filter system to use for my 20-35mm E, 55V and soon to be released 35-100mm E lenses. They range from 72mm to 77mm to 86mm (I think) and that means in order to just use one set of filters I need to jump to 95mm to cover them all. Not many manufacturers make 72-95mm magnetic step ups and like one of the replies above I wish to have a UV filter on permanently for protection (i.e. not a magnetic UV filter that can come off).

So that means fitting a screw in UV filter to each lens first, then step ups with magnetic capabilities so that any other filters I add will stick magnetically.

Nisi doesn't make a 72-95mm magnetic step up.
Polarpro Base plates should fit each lens but the 86mm base plate is coarse thread and I have no idea if the new 35-100mm lens has a coarse or standard thread.
Maven makes some really useful step up rings with built in UV filters which would be perfect except they also don't make a 72-95mm version of these.
Kase doesn't make a 72-95mm magnetic step up either!

I'm at my wits end to make this work with one set of filters or may be I shouldn't and get a 82mm set for the 20-35mm and 55V and something else for the new lens?

Help!
Click to expand...
Well, I have tried all kinds of magnetic filters. None of the are any good. Period. All you have to do is take a photo close up of some details with and without any of the fllters. THen magnify the one with the filter. Horrible. Ruins the whole reason we get a Hasselblad, the color and granularity. I send them all back, which was quite a job because I had dozens of filters etc. to try out.
 
I'm a fan of Breakthrough Filters's new magnetic system. I like the quality. They're expensive but the customer service and warranty are fantastic.
 
You must log in or register to reply here.
Back
Top