Hello everyone. I am a new member. I just purchased a used 500 C/M and am looking forward to reacquainting myself with film again. I have gone digital since my days with the Nikon D1X, and been primarily shooting with a Canon 1DsMkII, and 5DMkII. Both excellent cameras, but I have found myself shooting too fast, not enough thinking and composing. Any suggestions as far as accessories are concerned, please share with me. Tri.
Medium Format Forum
Register a free account now!
If you are registered, you get access to the members only section, can participate in the buy & sell second hand forum and last but not least you can reserve your preferred username before someone else takes it.
My first ever post
- Thread starter Tri Le
- Start date
polypal
Active Member
Hello Tri,
Welcome at Hasselbladinfo forum.
I second Terry advice.
He is not only right about the lens best suited for this kind of work.
He is also right it does not matter which one you choose as long as its a 150 Sonnar.
There are clean silver 150 Sonnars floating around the globe for around 350 USD.
Find a suitable shade or the even nicer proshade and you are in business.
Paul
Not so young any more but still going strong:
500 EL with early 150 silver Sonnar and proshade.
Welcome at Hasselbladinfo forum.
I second Terry advice.
He is not only right about the lens best suited for this kind of work.
He is also right it does not matter which one you choose as long as its a 150 Sonnar.
There are clean silver 150 Sonnars floating around the globe for around 350 USD.
Find a suitable shade or the even nicer proshade and you are in business.
Paul
Not so young any more but still going strong:
500 EL with early 150 silver Sonnar and proshade.
Attachments
-
EXIF150 C + Compendium.jpg
polypal
Active Member
Prisms do not wear much.
The worst part is paint chipping but that does not influence the performance just the looks.
The earliest prism is a NC2, also available as Kiev prism.
That one goes for 50-100 USD.
KEH often has bargains for these older prisms.
EL camera with NC2 prism
Later prisms like the PM 3 or PM 51 do exactly the same job but are more expensive.
The PM 45 is a different one.
That prism has a built in adjustment for users wearing glasses.
That makes the PM 45 a sought after prism and of course more expensive.
The worst part is paint chipping but that does not influence the performance just the looks.
The earliest prism is a NC2, also available as Kiev prism.
That one goes for 50-100 USD.
KEH often has bargains for these older prisms.
EL camera with NC2 prism
Later prisms like the PM 3 or PM 51 do exactly the same job but are more expensive.
The PM 45 is a different one.
That prism has a built in adjustment for users wearing glasses.
That makes the PM 45 a sought after prism and of course more expensive.
Attachments
-
EXIFELM + NC2.jpg
polypal
Active Member
Good point Terry, Magnification factor.
Tri, I would start with the 150 and see what results you get.
The 250 is often forgotten but is like the 150 an excellent lens.
Depending on the features of the face it can be useful for portraits.
Keep in mind the 250 is not a fast lens at F 5.6 !
Tri, I would start with the 150 and see what results you get.
The 250 is often forgotten but is like the 150 an excellent lens.
Depending on the features of the face it can be useful for portraits.
Keep in mind the 250 is not a fast lens at F 5.6 !
mselderhuis
New Member
The 10mm extension is good too, the 21 is a bit too much.
polypal
Active Member
Hello Don.
I am lucky to have a good technician who does a good job with these prisms.
He removes the leatherette and disassembles the complete prism.
The paint job is quite straight forward using primer, sanding the primer and applying several coats to finish.
He also cleans the glass elements because they attract a thin layer of dust that makes the prism less clear.
After a final assembly the prism is as good as new.
NC 2 rebuilt
I am lucky to have a good technician who does a good job with these prisms.
He removes the leatherette and disassembles the complete prism.
The paint job is quite straight forward using primer, sanding the primer and applying several coats to finish.
He also cleans the glass elements because they attract a thin layer of dust that makes the prism less clear.
After a final assembly the prism is as good as new.
NC 2 rebuilt
Attachments
-
EXIFNC 2 refurbished.jpg